Hands-on bootcamp
Advanced Drone Warfare
A hands-on drone warfare bootcamp. Every student builds, programs and flies their own hardware, and leaves with it.
Overview
- The course runs on the NEXCEPTOR kit and a custom transmitter. You assemble and program both yourself.
- It covers the whole embedded lifecycle: soldering and assembling the aircraft and its handheld controller, flashing firmware, talking to the inertial sensors, and a two-processor architecture that keeps flight-critical logic apart from the radio.
- You build a working RF link of your own — configurable modulation, custom packet formats, half-duplex protocols — and then add spread-spectrum hopping for resilience against interference and targeted disruption. The RF lab is based on the CC1101 transceiver.
- Wireless deception and counter-drone work: crafting and transmitting arbitrary beacon frames, plus telemetry protected with hardware-accelerated symmetric encryption.
- Every module pairs the two sides. You evaluate jamming, spoofing and deauthentication, and then implement the mitigation.
- Every drone is test-flown by the instructor before it is handed back. After that, students fly on their own.
What you will be able to do
- Build and bring up a complete embedded cyber-physical system, from board assembly and microcontroller bring-up to making heterogeneous environments talk to each other: Linux, FreeRTOS-class systems and AVR-class MCUs.
- Analyse, attack and harden the wireless protocols used by drone-class devices: craft custom frames, find the weaknesses, apply the defences.
- Deploy deception, monitoring and resilience strategies that keep a small airborne platform flying through RF interference, spoofing and protocol-level disruption.
Who it is for
- Security professionals, red team operators, hardware hackers and researchers who want to go deeper into embedded systems, RF security and cyber-physical attack and defence.
- Penetration testers, wireless specialists and engineers who want hands-on practice integrating Linux-class systems, microcontrollers and radio transceivers into a single offensive and defensive platform.
- It suits people coming from offensive security, industrial security and applied research alike.
Level and prerequisites
- Level
- Intermediate.
- Drones and RF
- No prior experience required. The embedded fundamentals you need are covered along the way, and students who already work with hardware, firmware or radio get the advanced scenarios.
- Soldering
- Basic skill with large components and headers helps, but it is not required: there is guidance on site.
- Programming
- Familiarity with C/C++ or a similar language, and with Linux, is useful. You will work across several embedded environments.
What you take home
- Drone kit
- NEXCEPTOR kit
- Transmitter
- Custom transmitter
- Tools
- Soldering kit
Dates
- Registration open — register at Black Hat (opens external site)
Black Hat Europe 2026 (opens external site)
ExCeL London
7 – 8 December 2026
- Registration open — register at Black Hat (opens external site)
Black Hat Asia 2027 (opens external site)
Marina Bay Sands, Singapore
28 February – 1 March 2027
| Event | Venue | Dates | Status |
|---|---|---|---|
| Black Hat Europe 2026 (opens external site) | ExCeL London | 7 – 8 December 2026 | Registration open — register at Black Hat (opens external site) |
| Black Hat Asia 2027 (opens external site) | Marina Bay Sands, Singapore | 28 February – 1 March 2027 | Registration open — register at Black Hat (opens external site) |
Each run links to its listing in the Black Hat catalogue, where registration is completed.
Previous editions
- Black Hat USA 2026Las Vegas2 cohortsSold out
Instructor

David Meléndez Cano
@taiksontexas (X) (opens external site)
Hardware security researcher, speaker and trainer. Madrid.
Private and corporate
The course can also run privately for a team. Write with the group size, location and preferred dates.